MINDPRINT DTC Spezifikationen PDF herunterladen (Seite 6)

1.4 Digital Input

If you wish to use the DTC™ as the front

end for digital mixers or hard-disk

recording systems, you can install a digital

interface into the expansion slot provided

for this purpose on the back of the DTC™.

Operation:

DIGITAL IN: Assuming the optional

DI-Mod 24/96 digital interface is installed,

pushing this switch in will activate the

digital input.

LINE/INSTR GAIN: adjusts the

preamplification level of LINE IN,

INSTRUMENT IN, and DIGITAL IN.

Note : The DIGITAL IN input is

functional only when the

INSTRUMENT IN jack is empty.

1.5 Insert

Connections:

On the rear panel, the DTC™ includes a

SEND and RETURN jack on each channel

for inserting external signal processors into

the DTC™ signal path. The connectors are

stereo-style balanced Tip-Ring-Sleeve jacks,

with the Tip hot (positive) and the Ring

cold (negative). The Sleeve is connected to

ground. When you insert an unbalanced

mono 1/4-inch plug, the RETURN

automatically switches to unbalanced

operating mode.

Operation:

INSERT: This switch allows you to use

the Send and Return jacks to cut into the

signal path. This occurs at a point

between the high-cut filter and the

parametric equalizer.

Note: If possible, set the level of

units connected with the DTC™

to +4dBu to take optimal

advantage of the dynamic

range of the DTC™.

MindPrint-DTC

INFO

The DTC™ can be expanded to include a digital

input and output with the MindPrint 24-bit digital

interface module, the DI-Mod 24/96. When the unit’s

Synchronisation is set to "Master", the sampling rate

can be switched between 44.1, 48 kHz and 96 kHz.

When set to “Auto”, the DI-Mod 24/96 will attempt to

read the digital input and sync to the sampling rate

of the incoming signal from anywhere between

32 kHz and 110 kHz. If in the "Auto" position no

useable signal is found, the DI-Mod 24/96 will itself

automatically assume the role of master digital clock.

For specifications see Section 5.

DI-Mod 24/96 AES/EBU

HELPFUL HINT

The Insert Send-Return can be used as an additional,

switchable +4 dBu input. If you use it this way, you

bypass the DTC™’s preamp stage.

BALANCED

SEND

INSERT A

BALANCED

RETURN

1 2 3 4 5 6 7 8 9 10 11 ... 39 40

Kommentare zu diesen Handbüchern

Keine Kommentare

MINDPRINT DTC Spezifikationen Seite 6

Kommentare zu diesen Handbüchern

Prodotti e manuali riguardandi Per l'auto Draw-tite 75784 MAX-FRAME RECEIVER